2.0mm/3.0mm Single-mode LC Simplex Epoxy Connectors
LC small form factor (SFF) field polish connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors shall be field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB per mated pair for multimode and singlemode fiber. It suitable for 2.0mm/3.0mm cable terminated.
Features / Benefits:
Precision low-loss factory polished connector with integral splice and fiber clamp;
Simple and fast connector termination, with no adhesives or field polishing required;
Provisions for visual light source verification to achieve optimal splice transmission;
Fibers supported: OM1, OM2, OM3, OM4, SM;
Wide operating temperature range for thermally stable optical performance.
Application:
10-GbE multimode and single-mode optical networks;
Intra-building backbone and horizontal fiber interconnections;
Inter-building OSP entrance terminations;
Data Center and WAN main cross-connect terminations;
Quick deployment remote data links;
Fiber to the Subscriber (FTTX);
Low reflection angle polish single-mode applications.
Specifications:
Advantage:
PUNO LC Fiber Optic Connectors provide a rugged solution for high-density telecommunication
rooms, LANs, public networks and fiber-to-the-desk applications. LC simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work area applications for high-speed data transmissions. The high-density design and 1.25mm ferrules double the port density (compared to SC connectors) to reduce space requirements on racks, enclosures, panels and face plates.
International Authoritative Certification:
Compliance with the international ISO9001, CE, FCC, RoHS standards. PUNO strict implementation of standardized management and control of the design, development, production, installation and service.
Workshop Overviews:
Among the total workshop area of more than 12,000 square meters, dust-free workshop room accupies 500 square meters while dust-proof room occupies 6,500 square meters.
Ordering Information - Fixed Optical Connector:
LC small form factor (SFF) field polish connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors shall be field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB per mated pair for multimode and singlemode fiber. It suitable for 2.0mm/3.0mm cable terminated.
Features / Benefits:
Precision low-loss factory polished connector with integral splice and fiber clamp;
Simple and fast connector termination, with no adhesives or field polishing required;
Provisions for visual light source verification to achieve optimal splice transmission;
Fibers supported: OM1, OM2, OM3, OM4, SM;
Wide operating temperature range for thermally stable optical performance.
Application:
10-GbE multimode and single-mode optical networks;
Intra-building backbone and horizontal fiber interconnections;
Inter-building OSP entrance terminations;
Data Center and WAN main cross-connect terminations;
Quick deployment remote data links;
Fiber to the Subscriber (FTTX);
Low reflection angle polish single-mode applications.
Specifications:
Compliance | IEC 61754-15, TIA 604-16 |
Technology | Full ceramic ferrule and sleeve |
Tuning | in 60° steps |
Mechanical resistance | 100N tensile load |
Thermal resistance | -40ºC to +85ºC, stock temperature range |
Flammability | UL 94-V0 |
Durability | Min. 1000 mating cycles |
Color of housing |
Single-mode, blue |
SM (APC 8°), green | |
Multimode, beige |
Advantage:
PUNO LC Fiber Optic Connectors provide a rugged solution for high-density telecommunication
rooms, LANs, public networks and fiber-to-the-desk applications. LC simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work area applications for high-speed data transmissions. The high-density design and 1.25mm ferrules double the port density (compared to SC connectors) to reduce space requirements on racks, enclosures, panels and face plates.
International Authoritative Certification:
Compliance with the international ISO9001, CE, FCC, RoHS standards. PUNO strict implementation of standardized management and control of the design, development, production, installation and service.
Workshop Overviews:
Among the total workshop area of more than 12,000 square meters, dust-free workshop room accupies 500 square meters while dust-proof room occupies 6,500 square meters.
Ordering Information - Fixed Optical Connector:
Fiber Type | 5-50/125; 6-62.5/125; 9-9/125; O-OM3 |
Connector Type | F-FC S-SC T-ST L-LC M-MU |
Polish Type | P-PC U-UPC A-APC |
Operating Wavelength | 1-850nm; 2-1310nm; 3-1550nm; 4-1310/1550nm; 5- 1310/1490nm |